[. . . ] If there is no DHCP server, the switch IP address will default to 192. Connect each computer to an RJ-45 network port on the switch front panel. [. . . ] Use Category 5 (Cat 5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector to make these connections. Double-click the Smart Control Center Utility icon on your desktop or in the Windows Start menu to run the utility and view this screen. Package Contents • • • • • • ACER Smart Switch™ GS728TP, GS728TPP, or GS752TP Rubber footpads for tabletop installation AC power cord 19-inch rack-mount kit for rack installation Installation guide Smart Switch resource CD that includes the Smart Control Center Utility and hardware installation guide. (A link to the online software administration manual is on the resource CD. ) Configure the Switch Install the Smart Control Center Utility and use it to configure the switch. Verify that the computer with the Smart Control Center Utility is on the same subnet as the switch. After you log in to the switch, the main System Information screen displays. Troubleshooting Tips Here are some tips for correcting simple problems you might have. €¢ Be sure to power on your computer and switch in the correct sequence: First, turn off the switch and computer. For each powered-on computer connected to the switch, the corresponding switch LAN port status LED is lit. Enter the default password of password in lower case letters and click Login. Consult the reference manual on the resource CD or the online help in the switch for assistance with configuration procedures. December 2012 For the complete EU Declaration of Conformity, visit http://support. Intended for indoor use only in all EU member states, EFTA states, and Switzerland. [. . . ] December 2012 For the complete EU Declaration of Conformity, visit http://support. Intended for indoor use only in all EU member states, EFTA states, and Switzerland. [. . . ]